How to Scale Web Sites
You use the Windows Azure Management Portal to scale your web sites, and to specify whether you want to run them in Free web site mode, Shared web site mode or Standard web site mode.
Table of Contents
Free Web Site Mode
When a web site is first created it runs in Free web site mode, meaning that it shares available compute resources with other subscribers that are also running web sites in Free or Shared web site mode.
A single instance of a web site configured to run in Free mode will provide somewhat limited performance when compared to other configurations but should still provide sufficient performance to complete development tasks or proof of concept work. It is recommended that you configure any "proof of concept" web sites to run in Free mode. You can create up to 10 web sites per region in Free mode.
If a web site that is configured to run in a single instance using Free web site mode is put into production, the resources available to the web site may prove to be inadequate as the average number of client requests increases over time. If the CPU time quota is exceeded for the web site, all web sites in the same subscription are stopped (Web site instances normally unload after going idle for 20 minutes). The web sites are started again at the next quota interval.
Before putting a web site into production, estimate the load that the web site will be expected to handle and consider scaling up / scaling out the web site by changing configuration options available on the web site's Scale management page.
Shared Web Site Mode
A web site that is configured as or updated to Shared mode uses a low-cost scaling mode that provides high availability and more performance than Free mode. Changing to Shared mode is easily done in the Scale tab of the management portal. These changes take only seconds to apply, and do not require code to be changed or the application to be redeployed. You can create up to 100 web sites per region in Shared mode.
A web site in Shared mode is deployed in the same multi-tenant environment as one in Free mode, but has no quotas or upper limit to the amount of bandwidth it can serve. The first 5 GB of bandwidth served on a Shared web site is free; subsequent bandwidth is charged at the standard "pay-as-you-go" rate for outbound bandwidth.
A web site running in Shared mode also now supports the ability to receive mapping for multiple custom DNS domain names, using both CNAME and A-records. Using A-records allows web sites to be accessed using only the domain name (e.g. http://microsoft.com in addition to http://www.microsoft.com). If you require custom domain SSL support, you can upgrade to Standard mode, which has support for both SNI and IP-based SSL.
A web site running in Shared mode benefits from high availability even with a single instance, but you can add up to 6 instances ("scale out") for even greater performance and fault tolerance. For more information, see "How to Change Scale Options for a Web Site" later in this document.
Standard Web Site Mode
A web site that is configured as Standard will provide high availability and more consistent performance than a web site that is configured as Free or Shared. Standard mode also has support for SNI and IP-based SSL certificates for custom domains. Before switching a web site from Free web site mode to Standard web site mode, you must first remove the spending caps in place for your Web Site subscription. To view or change options for your Windows Azure Web Sites subscription, see Windows Azure Subscriptions.
In Standard mode, you can create up to 500 web sites per region. If you have more than one web site in the same region, you can use the Choose Sites feature to decide which of the sites you want to run in Standard mode.
When you configure a web site as Standard, you can specify the size of the web site (Small, Medium or Large). A web site that is "scaled up" (configured with a larger Instance Size) will perform better under load.
You also specify a value for Instance Count (from 1 to 10). A web site running in Standard mode benefits from high availability even with a single instance, but scaling out (that is, increasing the value for Instance Count) will provide even greater performance and fault tolerance.
Unlike Shared mode, Standard mode web sites are priced based on instance count, not the number of web sites. A Standard mode instance can host multiple Standard mode web sites
The Autoscale feature, available in Standard mode only, lets you have Windows Azure automatically scale the instance count and instance size depending on load (scale by metric), or time (scheduled scaling), which makes running your web site more cost effective.
How to Change Scale Options for a Web Site
By default, a web site that is configured to run in Free or Shared web site mode has access to the resources associated with an ExtraSmall Virtual Machine Size described in the table at Virtual Machine and Cloud Service Sizes for Windows Azure.
To change the scaling of resources for a web site, in the Management Portal, open the web site's Scale management page to configure the following options:
Web Site Mode - Set to Free by default. When you change the Web Site Mode from Free or Shared to Standard, the web site is scaled up to run in a Small compute instance on a single dedicated core with access to additional memory, disk space and bandwidth.
Note: In order to configure Web sites to run in Standard mode, you must first remove spending limits associated with your Web sites subscription. To view or change options for your Windows Azure Web Sites subscription, see Windows Azure Subscriptions.
Choose Sites (Standard mode only) - Choose which web sites in the current region and subscription to run in Standard mode. To run all web sites in the current region and subscription in Standard mode, leave the Select All checkbox selected.
Instance Size (Standard mode only) - Provides options for additional scale up of a web site running in Standard web site mode. If Instance Size is changed from Small to Medium or Large, the web site will run in a compute instance of corresponding size with access to associated resources for each size. For more information, see Virtual Machine and Cloud Service Sizes for Windows Azure. The Instance Size setting is global for the web site
Edit Scale Settings for Schedule (Standard mode only) - Use this Autoscale feature to scale resources based on daytime versus nighttime, or weekday versus weekend. To start, choose Set up schedule times to bring up the Set up schedule times dialog box where you can make the following choices:
Choose a Time zone for the web site. Daylight Savings Time is respected for the time zone that you select.
Note: To scale for a different time zone, you must create a separate web site and configure it accordingly.
To scale the web site differently based on daytime or nighttime, choose Differing scale between Day and Night. Use the Time feature to specify the day start and end times in half hour increments. By default, the day starts at 8:00 AM and ends at 8:00 PM.
To scale the web site differently based on weekday versus weekend, choose Differing Scale between Weekday and Weekend. For the purposes of this feature, the weekend starts at the end of day Friday (8:00 PM by default), and ends at the beginning of the day on Monday (8:00 AM by default). The weekend profile uses the same day start and end that you define in the Time setting.
After you have made these settings, click OK to close the Schedule Times dialog box. The Edit Scale Settings for Schedule box now displays up to three recurring schedules: Week Day, Week Night, and Weekend. You can now select one of these schedules and use the Scale by Metric and the Instance Count features to fine tune the scaling of resources for the schedule that you chose.
Note: The Instance Size setting is global for the web site and does not change according to the schedule selected.
After you have finished making changes to all the schedules, click the Save icon in the command bar at the bottom of the page to save all schedule settings at once (you do not have to save each schedule individually).
Scale by Metric (Standard mode only) - For this Autoscale feature, choose CPU to have Windows Azure automatically scale the instance count and instance size depending on load. Enabling Scale by Metric enables the Target CPU option so that you can specify a target range for CPU usage, and modifies the Instance Count feature so that you can set the minimum and maximum number of virtual machines to be used for automatic scaling.
Note: When Scale by Metric is enabled, Windows Azure checks the CPU of your web site once every five minutes and adds instances as needed at that point in time. If CPU usage is low, Windows Azure will remove instances once every two hours to ensure that your website remains performant. Generally, putting the minimum instance count at 1 is appropriate. However, if you have sudden usage spikes on your web site, be sure that you have a sufficient minimum number of instances to handle the load. For example, if you have a sudden spike of traffic during the 5 minute interval before Windows Azure checks your CPU usage, your site might not be responsive during that time. If you expect sudden, large amounts of traffic, set the minimum instance count higher to anticipate these bursts.
Instance Count (Shared and Standard modes only) - A single instance in Shared or Standard mode already benefits from high availability, but you can provide even greater throughput and fault tolerance by running additional web site instances (that is, "scaling out"). In Shared mode, you can choose from 1 through 6 instances. In Standard mode, you can choose from 1 through 10 instances, and if you enable the Autoscale feature, you can set the minimum and maximum number of virtual machines to be used for automatic scaling.
Target CPU (Standard mode only) - This option appears only when Scale by Metric is enabled. Use the sliders to set the minimum and maximum percent CPU usage that you desire for your web site. Windows Azure will add or remove standard instances to keep CPU usage in this range.
Linked Resources - If you have linked a SQL database to your web site, you can scale your database here. Choose Web or Business depending on the storage capacity that you require. The Web edition offers a range of smaller capacities, while the Business edition offers a range of larger capacities. For more information, see Accounts and Billing in Windows Azure SQL Database.